PantheonSim / GPUs / NVIDIA GeForce RTX 4080

Simulated NVIDIA GeForce RTX 4080: a GPU profile for CUDA and ROCm testing

PantheonSim, the GPU simulator for CUDA and ROCm, simulates the NVIDIA GeForce RTX 4080 (Ada Lovelace, 8.9) as the profile nvidia/rtx4080. A 16 GB Ada Lovelace GeForce card. Its profile is built from public documents and not yet measured against a physical card.

The profile at a glance

These are the numbers a program can ask this simulated GPU, and the values nvidia-smi show for it. They come from the profile file in the simulator's repository, pinned to one commit of it.

Property	Value
Profile id	`nvidia/rtx4080`
Vendor and architecture	NVIDIA, Ada Lovelace
Compute capability	`8.9`
Device memory	16.0 GiB, GDDR
Streaming multiprocessors	76
Warp size	32
Max threads per multiprocessor	1536
Shared memory per block (opt-in maximum)	99 KiB
L2 cache	64 MiB
Memory bus width	256-bit
Power limit (profile)	320 W
Maximum clocks (profile)	2505 MHz shader, 11200 MHz memory
ECC memory	no
PCIe link reported	Gen4 x16
Tensor or matrix cores	yes
Verified (measured on a physical card)	not yet measured

What this GPU is for

A 16 GB Ada Lovelace GeForce card.

Ada Lovelace is compute capability 8.9. The L4 and L40S profiles were read from physical cards on AWS g6 and g6e instances, and the other Ada profiles are built from public documents.

Among the 37 NVIDIA profiles it ranks 32nd by device memory (16.0 GiB) and 27th by SMs (76), counting the largest as first.

Is this profile verified?

No. This profile is marked not verified: it is built from public documents only, and nothing in it was measured on a physical card. Some figures are derived or copied from the nearest profile where the vendor publishes none, so treat them as approximate, and memory sizes as upper bounds. Programs still run on it, and it still answers every call as the architecture's rules require, but a value such as a clock or a limit may differ from a real card's.

Simulate this GPU

Build the simulator (see the docs) or open the playground, then:

nvcc -cudart shared -arch=compute_89 my_app.cu -o my_app
vgpu run --gpu nvidia/rtx4080 ./my_app
vgpu shell -y --gpu nvidia/rtx4080 --count 4
vgpu info --gpu nvidia/rtx4080

This profile is compute capability 8.9. A kernel built for compute_75 runs on it and on every other NVIDIA profile; a kernel built for a newer architecture is refused by a profile that is older than it. Link the CUDA runtime shared (-cudart shared) so the simulator can stand in for it.

To use it every time, put gpu: nvidia/rtx4080 in a pantheonsim.yaml settings file, or in a GitHub Actions job give the PantheonSim action gpu: nvidia/rtx4080 (see CUDA and HIP tests in GitHub Actions). The simulator checks behaviour and has no timing model, so a run on a physical GPU before a release still counts. The CUDA guide explains the rest.

Where the numbers come from

Each profile file begins with a note on its sources. This is the note for NVIDIA GeForce RTX 4080, as written in the file:

Source note for nvidia/rtx4080

Public values; verified: false, nothing here has been measured on a card. Where each value comes from: - compute capability 8.9: NVIDIA's CUDA GPUs table (developer.nvidia.com/cuda-gpus). - SMs 76: NVIDIA Ada GPU Architecture whitepaper, Appendix B, Table 3 (RTX 4080 16 GB: 76 SMs, 9728 CUDA Cores at 128 an SM, 304 Tensor Cores). - memory 16 GB GDDR6X, 22.4 Gbps, 256-bit, 716.8 GB/s, boost clock 2505 MHz and 320 W Total Graphics Power: the same table. NVIDIA's "GB" for graphics memory is binary (see rtx2080ti.yaml), so vram_bytes is 16384 MiB; a real card's nvidia-smi total is a little smaller, so this is an upper bound. - PCI device 0x2704, "NVIDIA GeForce RTX 4080", from the name table in NVIDIA's open GPU kernel modules (g_nv_name_released.h, main at ca2d03e, 2026-10-07). - Per-SM limits are compute capability 8.9's, the same as nvidia/l4 and nvidia/l40s, which were read from physical cards.

The GPU index lists every profile, and this one is not yet measured.

Other Ada Lovelace profiles: